In any endotoxin testing lab, mixing is the most frequent step and the easiest one to overlook. Lyophilized reagents need reconstitution, standards need serial dilution, test samples need homogenization, and reaction mixtures need combining. Almost every stage calls for vortex mixing. With a handful of samples, doing it by hand works fine. But when a run involves a dozen or dozens of tubes, the pick up, vortex, time, set down, next tube cycle becomes the slowest and least controllable part of the workflow.

When Sample Numbers Grow, Manual Vortexing Breaks Down
Mixing one tube takes seconds. But as sample counts climb from 5 to 20 or 30, processing them one by one multiplies the cost. The pick-up, vortex, set-down loop eats into your schedule. How hard you press varies from person to person, so mixing intensity is never quite the same. Manual timing drifts. Operating conditions shift with the operator and the shift, and batch-to-batch consistency pays the price.
For QC labs at pharmaceutical companies and third-party testing labs that process samples back-to-back, throughput is not only about how fast the motor spins. It also covers how many samples you handle at once, how much repetitive work you cut, how heavy the manual burden is, and whether every batch runs under the same conditions. That is what batch mixing equipment is for.
A-GEN Smart Vortex Mixer AVX01: Built for Batch Mixing
The A-GEN Smart Vortex Mixer AVX01 runs on a high-performance brushless DC motor with a wide speed range of 300 to 3000 r/min. It reaches full speed in about 4 seconds and holds speed error within 5%. The 4.3-inch touchscreen supports multi-step program editing, so you can save and recall routine mixing protocols with a single touch.
Eight interchangeable modules are available. Among them, the dedicated ampoule module (AVX-08P) holds 12 x 2 mL or 6 x 5 mL ampoules. A push-pull fixture swaps modules in seconds: change the module, keep the host unit.
| Specification | AVX01 |
|---|---|
| Speed range | 300–3000 r/min, error within 5% |
| Timer | Up to 99 h 59 min 59 s |
| Operating modes | Touch and continuous, with programmable steps |
| Display | 4.3-inch touchscreen |
| Noise level | 65 dB(A) or lower |
| Dimensions / Weight | 225 × 168 × 85 mm / 4.3 kg |
| Warranty | 2 years, replacement instead of repair in year one |
In touch mode, a short press starts mixing, and a long press stops it, which suits quick mixing right after pipetting. In continuous mode, the timer lets batches run unattended for up to 99 hours, so overnight experiments need no repeated checking. Load the samples, set the parameters, and let the device handle the repetition while your team moves on to the next preparation.
One Device, the Full Testing Workflow
From reagent preparation to reaction setup, all four mixing steps run on the same device:
| Step in endotoxin testing | What mixing achieves |
|---|---|
| Reconstituting lyophilized reagents | Oscillation disperses the freeze-dried components once the reconstitution solution is added |
| Serial dilution of standards | Each dilution is mixed under the same conditions, removing tube-by-tube variation |
| Homogenizing test samples | Samples with slight layering or sediment are oscillated according to the protocol |
| Mixing the reaction system | A short oscillation after all components are added, before incubation begins |
Uniform parameters are what keep batch effects in check. Lock the speed and time into a program, and every sample in a batch is processed under identical conditions. How each person shakes a tube becomes the device running the program, and operator-to-operator variation stays out of your data.
FAQ
Can the vortex mixer handle ampoules?
Yes. The dedicated ampoule module (AVX-08P) mixes 12 × 2 mL or 6 × 5 mL ampoules, designed for high-frequency ampoule workflows such as endotoxin testing.
Can it mix microplates as well as tubes and ampoules?
Yes. The mixer also supports deep-well plates, 96- and 384-well microplates, and cell culture plates. See the instruments page for the full adapter list.
What does the warranty cover?
Two years on the complete unit, with replacement instead of repair in the first year. Service details are on the service page, and product documents are available from the download page.






.png)


.png)